right angle worm gearbox

High-Quality Right Angle Equipment Drives are made for efficiency, quiet procedure, and long service lifestyle. SDP/SI provides a broad selection of Right Angle Equipment Drives in a variety of configurations, materials, operating speeds, and multiple ratios. Standard catalog items include precision and commercial quality gear drives provided in both ” and metric sizes. For adjustments or custom designs contact and speak to a SDP/SI applications engineer.

Our providing includes, but is not limited to the following:
Miniature sized Right Position Gear Drives, 1 ” square, are perfect for compact designs that want low backlash and insight speeds up to 2000 rpm.

When weight can be an issue, get Correct Angle Bevel Equipment Drives that feature a lightweight housing of PTMT Polyester 30% glass filled, precision surface stainless steel shafts, sintered bronze bearings and molded nylon gears.

Right Angle Worm Gear Drives accommodate input boosts to 2000 rpm and are obtainable in gear ratios: 5:1, 10:1 and 20:1.

Right Angle and Dual Helical Equipment Drives are offered in two versions, light-duty, rated boosts to 600 rpm and durable, rated speeds up to 1725 rpm.

An economy group of Right Angle Bevel Gear Drives emerges in 1:1 and 2:1 ratios and rated speeds up to 500 rpm.

E Series Right Angle
The Ever-Power E Series is a high efficiency, right angle gear reducer created for increased torque density, reduced inventory and improved efficiency. Through the use of modified helical-bevel technology, the Electronic Series is able to operate at 90% efficiency and can provide up to 60% higher torque when compared to a typical worm equipment reducer. Through various accessories and modular components, the Electronic Series recreates the critical dimensions of a standard worm gearbox and the opportunity to reduce inventory.
Right-angle Worm Gearboxes
4 sizes available with rankings to 27 HP.
Available in single, dual & triple reduction.
Ratings from 7.8:1 to 59:1.
EP-worm-gearboxsEP Series variants, worm gear family
Ever-Power has been in the forefront of developing equipment technology to fill certain requirements of our OEM clients. Our close partnerships with this installed customer bottom provided much insight into their evolving dependence on more high-precision right-position gearing options. In order to fill that require, Ever-Power extended upon our correct angle product offering to include a number of high-precision worm gearboxes, known as our EP Series.
These servo grade speed reducers are perfect for the most challenging of movement control applications. Each series incorporates a globoidal worm gear mesh design to be able to achieve the torque handling capacity and the best levels of precision our SHIMPO customers attended to anticipate from us. The input design of our EP right-angle gearbox applies the same idea of motor modularity that is common across our High Precision item family, meaning our customers and distribution companions get the same degree of flexibility, product variety, and overall availability that’s unparalleled in your industry.
Benefits of the EP Series platform design;
Quiet operation, in comparison to other competitive worm gearing
Compact, with precise reduction ratios
High torsional rigidity and torque carrying capacity
A reduced backlash feature, unique among right-angle gearheads
Industry standard hollow bore result with other shafted options
Extremely lightweight, optimized construction
Maintenance free, lubrication for lifetime
These right-angle servo grade gearboxes are well suited for applications within custom assembly and test systems, packaging equipment, metal cutting and metal forming machinery, general purpose automotive, among many others. If the application requires the compact footprint of a right-angle worm equipment without sacrificing on the overall performance, contact Ever-Power about the EP Series today.
Standard Right Position Gearbox Features
All ratios equipped with right-hand worm gears
Load capacity unaffected by direction and rotation
Selection of mounting Options
Upon Request:
Left-Hand Gears
STAINLESS Input/Output Shafts
Solid or Hollow Output Shaft
Decide on a Gearbox or Speed Reducer
Worm Gear Velocity Reducers
sw-1-parent.jpg
SW-1
SWB-5 & SW-5
Right Angle Miter Gear Drives
miter-gear-parent.jpg
Miter Gear Drives
Mini Right Angle Helical Gear Drives
miniature-right-angle-parent.jpg
RA-200
RA-300
Custom Speed Reducers
custom-speed-reducer-parent.jpg
Custom Speed Reducers
GEARBOX REDUCERS
Right angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) are an ideal match for motors with high insight speeds, or when gearmotor efficiency is important. Get in touch with our technical sales staff for help identifying which gearbox solution is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers are designed with a hollow bore and invite for a corner turn with optional dual result. The reducers come in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes were created with five mounting options providing flexibility when incorporating the reducer into product.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The proper angle bevel gearbox combines the features of our right angle worm and planetary inline reducers. With a solid and efficient correct angle configuration, our right angle planetary gearboxes provide a robust solution. The proper angle bevel gearbox comes in 18 ratios which range from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series little planetary gearbox configurations provide the smallest footprint and quietest procedure of our velocity reducers. These gearboxes are designed to handle varying loads with little backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1, we have a solution to suit your needs. Our 52 frame size can be available with plastic-type material gears for noise-sensitive applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest effectiveness and best result torque of most our quickness reducers. These gearboxes are designed to handle varying loads with small backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio options which range from 5:1 to 1000:1, we have a solution to suit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes will be the top choice for constant duty applications. Their equipment cluster design provides a highly effective method for dissipating temperature. Parallel shaft gearboxes have the shortest length of our inline gear reducer options therefore they work well in environments with limited space. Our parallel shaft gear reducers offer an affordable drop-in alternative solution for most small parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, speed reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement when a gear in the type of a screw, also referred to as a worm, meshes with a worm equipment. These gears are typically created from bronze and the worms are steel or stainless steel.

While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other gear reduction boxes. A major benefit of worm gear reducers is definitely that they produce an output that is 90° from the insight and can be used to transmit higher torque or decrease rotational speed. Most often, a worm gearbox provides right hand threads; to improve the direction of the result, a left-hand thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio

Cast Iron Worm Gear Reducers are available in center distances 1.33 – 3.25 inches in ratio’s from 5:1 to 60:1. The products have a one piece #Fc20 all cast iron housing, NEMA electric motor quill style input flanges or shaft inputs, come pre-packed with synthetic oil and have a 12 months warranty.

Features:
Tapered roller bearings upon the input and output shafts
Embedded double-lip oil seals
Anti-rust primer applied outside and inside of the gearbox
Air dry special black paint
Product Specifications

OUTPUT SPEED (RPM) 175
OVERHUNG LOAD LBS. 300
EFFICIENCY 86
BRAND EP
MANUFACTURERS PART NUMBER HdRS133-10/1-R
CROSS REFERENCE Boston 713; Grove B213
DESCRIPTION Cast Iron Right Ange Worm Gear Reducer
BACKLASH (FT.) (ANGULAR MINUTES) 27
Result SHAFT THRUST LOAD (Pounds.) 300
MAX INPUT HP 0.77
MAX TORQUE (IN-LBS.) 247
WCD CENTER INCHES 1.33
GEAR RATIO 10:1

Ever-Power EP series triple-reduction worm gear quickness reducers can be found in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes available on request). Result torque ranges from 33,000 in pounds. for the 7” CD EP-70 to 582,900 in lbs for the EP-200. Mechanical HP input requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers are available in four configurations: horizontal, vertical, shafted, and shaft installed.

These reducers are well suited for water/waste-water apparatus drive applications such as for example thickeners and clarifiers, which require a vertical straight down shaft. Other obtainable configurations also make Ever-Power triple reduction reducers perfect for make use of on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or other process or components handling systems where huge torques/slow speeds are needed.

These reducers are also offered with a helical major reduction stage and so are termed the HDVM series

Enclosed Gears / Gearboxes
Enclosed gears, also called gearboxes or rate reducers, are open gears within a housing. The housing supports bearings and shafts, retains in lubricants, and protects the components from surrounding circumstances. Gearboxes are available in an array of load capacities and speed ratios.

The objective of a gearbox is to improve or reduce speed. Because of this, torque output will be the inverse of the function. If the enclosed drive can be a velocity reducer, the torque result will increase; if the drive increases speed, the torque output will decrease. Gear drive selection elements include: shaft orientation, quickness ratio, design type, nature of load, gear rating, environment, mounting position, operating temperature range, and lubrication.

Basic Types of Gearboxes

Worm Gear Speed Reducers
A single reduction swiftness reducer can achieve up to 100:1 reduction ratio in a small package. Referred to as right angle drives, these consist of a cylindrical worm with screw threads and a worm. With an individual start worm, the worm equipment advances only 1 tooth for each 360-degree convert of the worm. So, whatever the worm’s size, the apparatus ratio may be the ‘size of the worm equipment to 1′. Higher reduction ratios could be created through the use of double and triple reduction ratios.

Helical Gear Speed Reducers
Provide high-efficiency speed decrease through 1, 2, 3, or 4 pieces of gears. Power can be transmitted from a right angle worm gearbox high-velocity pinion to a slower-speed equipment. Helical gears usually operate with their shafts parallel to each other. The two most common types will be the concentric (input and output shafts are in series) and parallel shaft (input and output shafts are offset). Single-stage helical equipment reducers are usually used for equipment ratios up to about 8:1. Where decrease speeds and higher ratios are required, double, triple, and quadruple equipment reduction stages can be used.

Tags:

Power Take Off Shaft

As one of leading power take off shaft manufacturers, suppliers and exporters of mechanical products, We offer power take off shaft and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of power take off shaft.

Recent Posts