Cyclo Drive Reducer

Cycloidal pinwheel reducer is definitely a up-dated of new type transmissing machine designed with K-H-V less tooth engagement and the cycloidal pin wheel clenching system, which are widely used in drive and minimizing of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical Market, cranes, job machinery etc and conveyors. various fields.
Features:

1. Equipment is made from high durability low carbon alloy metal by carburizing and quenching. The hardness of tooth surface area can reach HRC58-62. CNC grinding technology is followed for all with high precision, gears and good call performance
2. high transmission performance: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light weight, long service lifestyle and high bearing ability;
5. convenient to assemble, disassemble and check.

Operation specifications and precautions
1.High modularization design: many equip with various electric motor or other power insight conveniently.Same machine type may equip with various power motor. It really is easy to realize the combination and
junction between every equipment type.
2.Transmission ratio: okay division, wide scope. The combined machine type may form large transmission ratio, i.e. outcome suprisingly low rotary speed.
3.Form of installation: the position to be installed isn’t limited.
4.High strength, compact: the box body is made of substantial strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and excellent grinding process, which means bearing potential of unitvolume is huge.
5.Long life: Under the condition of right type chosen (including choosing ideal operation parameters)normal procedure and maintenance, the life of main elements of speed reducer (except sporting parts) shouldn’t be significantly less than 20000 hours. The wearing parts include lubricating bearing, oil seal and essential oil.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is normally low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High speed ratio and efficiency
Single stage transmission may reach to at least one 1:87 of speed-down ratio and the efficiency is usually more than 90%. If use multi-speed travel the speed-down ratio is normally bigger.
2. Compact
Being adapted epicyclic tranny basic principle, the input and result shaft are in same axis center, it is compact.
3. Smooth and secure run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is bound at the minimum content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be obtained.The structure is simple, but it can understand high reduction ratio unit.
2. Small gear clearance
The Get, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are engaged simultaneously, and there are two gears engaged with 180 degree symmetry. Accordingly, the affect of tooth pitch error and cumulative tooth pitch error on the rotation precision is relatively average, which makes the positioning precision and rotation accuracy reach an extremely high level.
4. Less parts, easy installation
The three basic components achieve a high deceleration ratio, and they are all on the same axis, therefore the kit is simple to install and simple to shape.
5. Small in size and light in weight
Compared with the prior gear device, the quantity is 1/3, the weight is 1/2, but can obtain the same torque capacity and reduction ratio, obtaining small lightweight.
6 High torque capacity
Flexible wheel material USES specialized steel with excessive fatigue strength.Not the same as ordinary transmission device, the quantity of teeth meshing accounts for about 30% of the full total number of teeth. Furthermore, it is in contact with the surface, so that the pressure borne by each equipment is reduced and huge torque capability can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the energy loss caused by friction. Therefore, high lowering ratio can be achieved while maintaining high productivity, and miniaturization of driving motor can be realized.
8. Low noise
The gear meshing cycle speed is low, the transmission activity force balance, therefore the operation is quiet, and the vibration is quite small.
◆Substantial speed ratio and excessive efficiency single-stage transmission can perform a deceleration ratio of just one 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission is used, the deceleration ratio will be larger.
◆Because planetary transmission theory is adopted, the type shaft and outcome shaft are on the same axis line, in order that the machine unit can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is bigger, and the mechanism of balancing machine parts will make the vibration and voice limited by a minimum.
◆Reliable use and long service life for the reason that primary parts are made from substantial carbon chromium steel, large strength is definitely obtained by quenching (HRC58-62), and rolling friction is used in a few transmission contacts, so the service life is very long.
Cycloid reducer is usually a cycloid needle teeth meshing planetary transmission principle drive models, is an excellent transmission has many advantages, versatile, and may be both positive and negative operation.

•Big ratio, and large efficiency Smooth operation,

• low noise The usage of reliable,

• long life can reach 50000 hours

• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically zero wear, durable.

• Compact structure,

• small size Because the use of a planetary transmission, the insight shaft and the end result shaft on a single axis, which makes the model to obtain the smallest possible size.

• Reasonable design, easy maintenance, and breakdown easily install,

• the least number of parts together with simple lubrication, cycloid reducer trusted by the user.
(1)Size above PL/PF120(including)high torque products adopt integral double wall planet pinion carrier, precision and improve the output strength.

(2).Hoop clamp coupling have five connection methods suited to different application environments.

(3).Size in this article PL/PF120(including)precision and high durability integral inner gear casing, processed in a single station,which eliminate the cumulative error and assembling error of split type.Remove casting process;adopt incredibly hot of forging process, which will reduce the blank material defects.

(4).The meshing gear adopt shaving method after carburizing and quenching,which easier to make gear surface area smooth and high accuracy,reduce the temperature rising caused by gear area gluing and friction.
This series worm-gear reducer was engineered after RV worm microreducer, that have a complete norm, wide speed for selection, and several mounting positions. Its functionality and mounting dime nsions conform the same sorts of foreign.
The mixture of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, low noise, beautiful shape, radiate heat efficiently and compact structure.
Great sealing and adaptability.Its combo with T equipment reducer and MB/MBN variator may meet all varieties of speed requirement.

Tags:

Power Take Off Shaft

As one of leading power take off shaft manufacturers, suppliers and exporters of mechanical products, We offer power take off shaft and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of power take off shaft.

Recent Posts